Stock Rom File

Firmware For Android

How to Use Xiaomi Mi Flash Tool

These are the instructions to Flash Xiaomi Firmware (Stock Rom) using Xiaomi Mi Flash Tool on Windows PC. Requirements: Your Xiaomi Mobile Phone should have at-least 50-70 percent of phone battery to perform the flashing process.

How to Use Xiaomi MI Flash Tool

Step 1: Download and extract the Xiaomi Mi Flash Tool on your PC.

Step 2: Download Xiaomi Firmware For All Models skip this method if you already have Stock Rom for Xiaomi. after installed Flash file extract it on your computer.

Step 3: Download and install Xiaomi USB Drivers on your PC. Skip this method If you have already installed the Xiaomi USB Drivers.

Step 4: Now, Start the Setup File to install Xiaomi Mi Flash Tool on your PC.

How to Use Xiaomi Mi Flash Tool

Step 5: SWITCH OFF your Xiaomi Device.

Step 6: You need to boot your Xiaomi Mobile Phone into the Download Mode (Fastboot mode). If you want To boot into the download mode: Press and Hold Power + Volume Down button for 9-10 seconds.

Use Xiaomi Mi Flash Tool.jpg

Step 7: Now, its time to Connect your Xiaomi Device to the PC using the Original USB cable.

Step 8: Open start menu and start Xiaomi Mi Flash Tool .

Step 9: After launch , Press on the Button and Select the Firmware Folder.

How to Use Xiaomi Mi Tool

Step 10: Now, Click to start the Flashing Process.

How to use xiaomi Flash tool

Step 11: Once your flashing process is completed, you will be able to see the Success Message in Xiaomi Flash Tool.

xiaomi Flash tool

Step 12: Once Flashing process is completed, disconnect your device from the computer and Turn it ON.


Stock Rom File © 2018