Stock Rom File

Firmware For Android

How to Use Smart Phone Flash Tool

How to Use Smart Phone Flash Tool These are the instructions to Flash Android Firmware (Stock Rom) using Smart Phone Flash Tool on Windows PC. Requirements: Your Mobile Phone should have at-least 50-70 percent of phone battery to perform the flashing process.

How to Use Smart Phone Flash Tool

Step 1: Download USB Drivers  For Your Mobile Phone in your PC. If Android USB Drivers are already set up on your PC then pass this step.

Step 2: Power Off your Android phone and remove the Battery (if it is removable).

How to use smart phone flash tool

Step 3: Download the Firmware or custom Rom which you want to Flash on your Android cellphone and extract it in your computer.

Step 4: Download and Extract Smart Phone Flash tool in your computer.

Step 5: Now Open Flash_tool.exe (you may find this from the extracted files in Step#6).

use smart phone flash tool

Step 6: Once smart cellphone Flash tool is released, click on on the download Tab.

How to use flash tool

Step 7: inside the download Tab, now click at the scatter-loading button.


Step 8: Now, find the Scatter file (you’ll find the scatter file in the Firmware folder).

Smart phone Flash Tool Free

Step 9: Now, click at the download Button to start the Flashing system.

Smart phone Flash Tool Download

Step 10: Now, connect your phone to the PC the usage of USB Cable (with out battery- if it is removable). After connecting the device to the PC Press volume Down or volume Up key, in order that your PC without difficulty detect your cellphone.

Step 11: once Flashing is finished, a green Ring will appear.

Download-OK-Green-Ring Stock Rom File

Step 12: Close the smartphone Flash tool for your PC and disconnect your Android smartphone from the PC. Congratulations, Now your Android cellphone is successfully running the Firmware you have Downloaded.

Stock Rom File © 2018