These are the instructions to flash Samsung Firmware (Original Stock Rom) using Odin tool on Windows PC.Requirements: Your Samsung Mobile Phone should have at-least 50-70 percent of phone battery to perform the flashing process.
Flash Samsung Firmware Using Odin
Step 1: Download and install Samsung USB Driver on your PC. Skip this method If you have already installed the Samsung USB Drivers.
Step 2: Download Firmware (Flash File) For All Samsung Device skip this method if you already have Stock Rom for Samsung. after installed Flash file extract it on your computer.
Step 3: Now, Download and extract Odin Flash Tool on your PC.
Step 4: Power Off your Samsung Device.
Step 5: Now, you need to boot into Download mode. To boot into Download Mode: Press and Hold Volume Down Key, Home Key and Power Key. At the point when you phone vibrates Leave the Power Key yet Keep holding the Volume Down Key and Home key. You will boot into the Download Mode.
Step 6: In the Download mode to you can see a warning option with yellow triangle sign. now press the Volume up key to continue.
Step 7: Now extract Odin Flash tool & Open this exe file:
Step 8: Now connect your mobile phone with your computer Odin Flash tool automatic recognized your Samsung device and show added message at the lower left panel.
Step 9: Now press AP button & select tar.mdf download (From Step 2)
Step 10: Now click start button in Odin to flashing process.
Step 11: After complete the processing you will see the green pass message during this process your device will restart automatically.
Step 12: Now unplug your device from the PC. it will get into a boot loop. To fix this error, switch off your mobile phone and boot into the “Recovery” mode by press these button the Volume Up & Power and Home buttons.
Step 13: Now go to wipe date/ factory reset and clear cache after this press Reboot System Now.
Step 15: After this your Samsung Android phone is reset and fresh Firmware downloaded.