Stock Rom File

Firmware For Android

Download Vivo Y53 Firmware – Android Stock ROM


Are you looking for the stock ROM firmware of your device Vivo Y53? If yes your answer, you are on the right page. We have given the direct link to download Vivo Y53 firmware.

Download Vivo Y53 stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool, and the firmware file.

Download Vvo Y53 Firmware

Download Vivo Y53 Firmware

Stock ROM File Name: Vivo_Y53_PD1628F_EX_A_1.11.1.zip
Stock ROM File Size: 3 GB
Android OS Version: 7.0

Download Now

Stock ROM File Name: Vivo_Y53_PD1628F_EX_A_1.11.1_OTA.zip
Stock ROM File Size: 1 GB
Android OS Version: 7.0

Download Now

Stock ROM File Name: Vivo_Y53_PD1628_A_1.10.3_28032017.zip
Stock ROM File Size: 3 GB
Android OS Version: 7.0

Download Now

How To Flash Stock ROM Firmware On Vivo Y53

Step 1: To get started, download QComDloader and the firmware file for your device and extract both of them to a folder on your computer. Once done, download Vivo Y53 USB driver and install it on your computer.

Step 2: Now switch off your smartphone and connect it to your PC or Laptop computer using the original USB data cable.

Switch Off Device

Step 3: Next, go to the folder where you have extracted the QComDLoader flash tool and click “QComDloader.exe” to launch the flash tool.

Launch QComDLoader

Step 4: In the QComDLoader tool window, click on the “Load” button and select the extracted firmware folder.

Load Firmware QComDLoader

Step 5: Next, click on the “Settings” button to open up QComDLoader settings panel. Here, choose “Upgrade” as Download Mode. Once done, tick the box next to “Validate Download ROM“. Now enter the Chipset number of your device in the “Chipset” box (you can get this number from the eMMC file name). For example, if the eMMC file name for your device is prog_emmc_firehose_8916.mbn, the chipset number will be 8916. Once done, leave the remaining settings (eMMC Programmer, Patch0 and RAW Program) as it is and click “Ok“.

Validate Firmware QComDLoader

Step 6: Now click on the “Start” button to launch the flashing process and once it is finished, you will get the Passed message as shown in the screenshot below.

Passed QComDLoader

That’s it. Now you have successfully finished flashing firmware on your Vivo Y53 Android device. If you encounter any errors while following this tutorial, do let me know via the comments section given below.

Rate This Post:

[Total: 0 Average: 0]



Source link

Stock Rom File © 2018